Método DLP
ESENPT

How to print custom caps

Caps with logos are in high demand for businesses, teams and events. With DTF they are fast and full color.

By Método DLP · PrintLab Academy · Updated 2026-10-25

How to print custom caps
ShareFacebookTelegramX

Design size

The front of a cap usually carries a design about 3 to 4 inches wide by 2 to 2.5 inches tall.

Equipment

Ideally a cap press with a curved platen. Without one, you can print a patch and then sew or glue it.

Step by step

  1. Pre-press the cap a few seconds to remove moisture.
  2. Center the DTF transfer and secure it with heat tape.
  3. Press with medium pressure according to your film's settings.
  4. Peel and do a short second press with a Teflon sheet.

Frequently asked questions

Can you sublimate a cap?

Only white polyester caps or caps with a sublimation front panel. For cotton or colored caps, use DTF.

ShareFacebookTelegramX

Keep learning

🥤How to sublimate tumblersGuide to sublimating 20 oz tumblers: sizes, wrapping, shrink wrap, temperature and how to avoid the white seam…🛠️DTF problems and how to fix themFixes for the most common DTF problems: peeling after washing, cracking, powder halo, yellow white ink, press …🖨️What is DTF printing and how does it work?What DTF (Direct to Film) printing is, how it works step by step, which fabrics it works on, pros and cons, co…