Método DLPHeat press temperature and time chart for DTF and sublimation
These are reference settings that work on most equipment. Always check with your film, paper or blank supplier and do a test before production.
DTF chart
| Material | Temperature | Time | Pressure |
|---|---|---|---|
| Cotton and blends | 290–310 °F (145–155 °C) | 8–15 s | Medium–firm |
| Polyester and dry-fit | 285–295 °F (140–145 °C) | 8–12 s | Medium |
| Heavy hoodie | 290–310 °F | 10–15 s | Medium–firm |
| Canvas tote bag | 290–310 °F | 10–15 s | Firm |
| Cap (curved press) | 285–300 °F (140–150 °C) | 10–12 s | Medium |
- Pre-press the garment 3 to 5 seconds to remove moisture.
- After peeling, re-press 5 to 10 seconds with a Teflon sheet or parchment paper.
Sublimation chart
| Product | Temperature | Time | Pressure |
|---|---|---|---|
| Polyester t-shirt | 385–400 °F (195–205 °C) | 40–60 s | Light–medium |
| Ceramic mug (mug press) | 355–400 °F (180–205 °C) | 60–300 s depending on the press | Medium |
| Tumbler (tumbler press) | 365–385 °F (185–195 °C) | 100–120 s | Medium |
| Mouse pad | 375–400 °F (190–205 °C) | 40–45 s | Light–medium |
| Polyester pillow | 385–392 °F (195–200 °C) | 45–60 s | Medium |
| Ceramic tile | 392–400 °F (200–205 °C) | 6–7 min | Medium |
| Aluminum panel | 392–400 °F | 60 s | Medium |
💡 Every press heats differently: check the real temperature with an infrared thermometer and write down the settings that work best.
Temperatures and times are a reference: always check with your supplier and do a test.
Frequently asked questions
Should I peel DTF hot or cold?
It depends on the film: there are cold-peel, hot-peel and both. Follow your supplier's instructions.
Why does the press leave marks?
Too much pressure or a sensitive fabric like polyester. Lower the pressure and use a pressing pillow or Teflon sheet.